Category Archive for: Triode Lab

Reference Integrated Amplifier (2020+) The new 2A3 Integrated amplifier: The 2A3 EVO Ten years after the revolution in integrated amp design that was the original 2A3-i, and also ten years of R&D on that original design, we can safely call this the end game for this integrated amp. We’re proud to say that this is

The new EL84 flagship amplifiers, to celebrate our 10th year debut the original EL84TT! Debut 2019 Available to configure in deep Class A Push Pull Triode 12W, or Class A Push Pull Ultra Linear 26W *Power figures are BEFORE distortion happens, and the nominal/max power numbers are higher. Conservative rated. Standard Part List : HASHIMOTO

Parallel 2A3 per Channel – 8W minimum (It drives close to a 211, which really makes 9-10W in SE) Hashimoto x Triode Lab 30W Flagship Output Transformers (Design by Triode Lab / Engineered by Hashimoto) Full suit of Hashimoto transformers (Starting 2017) Dual Hashimoto Choke transformers – One supply the operation and one supply the

FFX – the top-of-the-line 2A3S, some considered it as the best compact stereo 2A3 SET amp available on the market, also our bestseller. It will continue to be sold and built, carried over from the MK2 design – it is perfect (tone, performance, and measurements) and we do not wish to make any possible change

And if you want more power around with 2A3 tubes, we also have the 8 Watts 2A3 PSDM (Parallel Stereo Dual Mono) version for our 2A3 connoisseurs. And 4 Watts for the 45 PSDM. DUO Feedback Technology , exclusive and debut on this 2A3 Parallel SE Design. Double the bandwidth, higher efficiency and stability, lower

45RS-R Single Ended Triode Mono Amplifiers Parallel  45  Tubes per Channel – 4W minimum Full suit of Hashimoto transformers (Starting 2017) Dual Hashimoto Choke transformers – One supply the operation and one supply the tubes), following its dedicated dual high quality Mundorf M-Lytic Ecaps Hashimoto 45/2A3 power transformer  (The best kind power transformer for the 2A3 application currently, and it makes

45RS Single Ended Triode Stereo Amplifier Your choice of 12AX7 or 6H30 as drivers Power output :  45 – 2W before distortion The 12AX7 version is handmade in our usual top notch 3D classic hard-wiring ; 6H30 version required a more complicated design and required to perform best on a circuit board that is entirely grounded/shielded for the best result. We’ve mastered this tube over a

45 Mini Single Ended Triode Stereo Amplifier So here is the small or mini version to our reference 2A3i. The Mini is constructed with the very powerful and quiet 12AX7, to yield a single stage pre-amp. We’d considered using both 5687 or 6H30 tubes, but both will require a 2-stage design (plus the availability of tubes is